RPT-C300 Battery Regeneration System

6V~12V Regenerator Mode(Max. 25A), Charge Mode, Power Supply Mode, Discharge Mode(Max. 30A) and Internal Resistance & CCA (For Car battery ) Checking (6-in-1) as newly upgraded. For 6V~12V all kinds of Lead-Acid Batteries, the regeneration performance will be much superior to any other products. Input AC Power Consumption: 550W (max.). You can resell RPT-C300 to Battery wholesale, retail shops and Car repair shops as a battery physician. This item will be very good for battery sellers due to the superior restoration effectiveness for feeble new batteries which lost chemical activation and over-discharged.  All functions and features are same with RPT-T300 (7-in-1).  Only one difference is RPT-C300 (6-in-1) does not have the 'Condition Test' mode. (Same as a Battery Condition Identifier) 280mm(H) x 430mm(W) x 520mm(D), 13.2kg

1. Battery Regenerator at 'REGENERATION' mode
2. Battery Charger at 'CHARGE' mode
3. Power Supply at 'POWER SUPPLY' mode (Manual setting mode of Voltage, Current & Time for special & sleeping batteries)
4. Battery Discharger (420 Watts) at 'DISCHARGE' mode
5. IR (Internal Resistance) Checking - before & after 2 ways
6. CCA (Clod Cranking Ampere for Car Battery ONLY) Checking - before & after 2 ways

* Maximum Limited Output Current : 6V~12V = 25A
* A serial connection up to 6V x 2 or 2V x 6 (12V) batteries at the same time. (up to 300Ah).

6V~12V Regenerator Mode(Max. 25A), Charge Mode, Power Supply Mode, Discharge Mode(Max. 30A) and Internal Resistance & CCA (For Car battery ) Checking (6-in-1) as newly upgraded. For 6V~12V all kinds of Lead-Acid Batteries, the regeneration performance will be much superior to any other products. Input AC Power Consumption: 550W (max.). You can resell RPT-C300 to Battery wholesale, retail shops and Car repair shops as a battery physician. This item will be very good for battery sellers due to the superior restoration effectiveness for feeble new batteries which lost chemical activation and over-discharged.  All functions and features are same with RPT-T300 (7-in-1).  Only one difference is RPT-C300 (6-in-1) does not have the 'Condition Test' mode. (Same as a Battery Condition Identifier) 280mm(H) x 430mm(W) x 520mm(D), 13.2kg

1. Battery Regenerator at 'REGENERATION' mode
2. Battery Charger at 'CHARGE' mode
3. Power Supply at 'POWER SUPPLY' mode (Manual setting mode of Voltage, Current & Time for special & sleeping batteries)
4. Battery Discharger (420 Watts) at 'DISCHARGE' mode
5. IR (Internal Resistance) Checking - before & after 2 ways
6. CCA (Clod Cranking Ampere for Car Battery ONLY) Checking - before & after 2 ways

* Maximum Limited Output Current : 6V~12V = 25A
* A serial connection up to 6V x 2 or 2V x 6 (12V) batteries at the same time. (up to 300Ah).